CR 20

A chlorinated rubber based sealer for car parks decks, basements, floors etc. With a gloss level of low satin this is an excellent sealer for everyday use environments.

Directions for Use

Surface preparation for steel substrates will require an abrasive blast. Clean to remove mill scale, rust and old paint. Concrete surfaces should be shot blast or acid etched. Ensure concrete is cured for a minimum 28 days. CR20 can be applied by brush, roller, air or airless spray after suitable thinning. CR20 has an application rate of approximately 6-10sqm/litre. It is a two coat system. Clean up with T7 Thinner. Available in 20 litre and 200 litre packs. Read all warnings.
Product Technical Data Material Safety Data

Contact Miteq

We can be found at:

U1, 45-49 Popes Rd.
Keysborough, Victoria 3173

P: +61 3 9532 5747
F: +61 3 9798 5571
M: +61 438 315 138

sales - [email protected]

accounts - [email protected]

manufacturing - [email protected]