W 408

A high performance two pack water based epoxy. It is a chemically cured, air drying coating exhibiting high resistance to corrosive chemicals and excellent adhesion to damp substrates without the need for a primer.

Directions for Use

Steel surfaces should be abrasive blast cleaned where possible, power wire brushing is acceptable. Concrete surfaces should be shot blasted or cleaned using a high pressure washer. Stir the contents of each container seperately. Apply by brush, roller or spray. Dilution up to 10% for spray application is acceptable. Spray application should be in heavy passes overlapping by 50%. Maintain a wet edge. When using a roller work in different directions to eliminate pin holes. Do not over work coating. Available in 16 litre kits. Clean up with water. Read all warnings
Product Technical Data Material Safety Data

Contact Miteq

We can be found at:

U1, 45-49 Popes Rd.
Keysborough, Victoria 3173

P: +61 3 9532 5747
F: +61 3 9798 5571
M: +61 438 315 138

sales - [email protected]

accounts - [email protected]

manufacturing - [email protected]