Surface Sealer 203

Sealer 203 is a sacrificial (surface) anti-graffiti coating suitable for use on brick, concrete and a range of masonry surfaces. Sealer 203 will change the appearance of the surface to be treated, giving a "wet look" finish. It forms a thin film between the surface to be protected and any graffiti or other staining substance. The graffiti can be easily removed by simply cleaning the surface with hot, high-pressure water.

Directions for Use

The surface to be treated should be dry and free from oil and laitance. Ensure area is completely dry prior to application. For more pourous surfaces, it is recommended to pre-seal. Use material directly from can. Do not dilute. Always test a small area prior to commencement to ascertain the effect of the sealer on the surface. Apply sealer to the prepared surface by brush, roller or airless spray. The sealed surface will be suitable for use after 24 hours. Allow 10m2/litre per coat. Coverage will depend on surface porosity and substrate type. For removal instructions please see data sheet below. Shelf Life 12 months in unopened containers. Read all warnings.
Product Technical Data Material Safety Data

Contact Miteq

We can be found at:

U1, 45-49 Popes Rd.
Keysborough, Victoria 3173

P: +61 3 9532 5747
F: +61 3 9798 5571
M: +61 438 315 138

sales - [email protected]

accounts - [email protected]

manufacturing - [email protected]