Solvent based penetrating sealer designed to enhance and enrich the look of marble, natural stone, polished concrete, pressed pavers and a comprehensive range of natural stone.
Sealer 103 Colour Enhancer is designed particularly for high level protection of dense surfaces (granite, bluestone etc.), high traffic areas such as driveways, patios and foyers.
It is suitable for external and internal applications.
Sealer 103 penetrates the surface without effecting slip resistance. It provides maximum stain protection against oils, foodstuffs and airborne pollutants; and can be applied to a wide range of surfaces.
Available in 5 & 20 Litre containers.
Directions for use
Power wash surfaces to be treated.
Remove stains caused by oil, grease and soils with the recommended Miteq cleaner. Surface must be dry prior to application.
Apply using a brush, roller or low pressure spray.
Do not apply excessively or allow the sealer to pool on the surface.
Always test a small area prior to commencement to ascertain the effect of the sealer on the surface.
Do not use above 30°C or below 10°C or if rain is imminent.
Use material directly from container. Do not dilute. The sealed surface will be suitable for foot traffic after 24 hours.
Do not wash down for 48 hours following application.
Coverage will depend on surface porosity. 2m2/litre on very porous surfaces and 5m2/litre on dense surfaces as a guide.
Shelf Life – 12 months in unopened containers. Read all warnings.