A high performance two pack water based epoxy. It is a chemically cured, air drying coating exhibiting high resistance to corrosive chemicals and excellent adhesion to damp substrates without the need for a primer.
Directions for Use
Steel surfaces should be abrasive blast cleaned where possible, power wire brushing is acceptable. Concrete surfaces should be shot blasted or cleaned using a high pressure washer.
Stir the contents of each container seperately.
Apply by brush, roller or spray. Dilution up to 10% for spray application is acceptable.
Spray application should be in heavy passes overlapping by 50%. Maintain a wet edge.
When using a roller work in different directions to eliminate pin holes. Do not over work coating.
Available in 16 litre kits.
Clean up with water.
Read all warnings.